fiberglass chopped strand mat (CSM)

chopped strand mat: 1.good mat integrity 2 low fuzz 3.high dry 4.wet tensile strength 5.good transparence  chopped strand mat:E-Glass Emulsion Chopped Strand Mat is made of randomly distributed chopped strands held tighter by an emulsion binder. It is suited with UP, VE, and EP resins.The roll width ranges are from 50mm to 1270mm. Special requirements may be available upon request. 

It's usually applied to boat, auto parts, various pannel, housings and cooling tower.

Features

Product Features: Glass Type: E-glass, C-glassBinder Type: Emulsion/PowerArea Weight: 100-900g/m2. Usually 300gsm/450gsm/600gsm Roll Width: 800-2800mm Usually 1040mm/1270mmRoll Weight: 20-60kgs Usually 30kgs/36kgs/40kgs

Uniform density ensures consistent fiberglass content and mechanical properties of the final products. The mats feature good mat integrity, low fuzz, less material waste and small roll diameter, excellent flexibility ensures good moldability with no springback at sharp angles, fast and consistent wet-out speed in resins and rapid air lease enhangce molding productivity and mechanica properties of the products. The product have high dry and wet strength and good transparency.

Property	Glass Type	Area Weight(%)	Moisture  Content(%)	Combustible Content(%)	Breakage Strength(N)	Width(mm)
EMC225	E	-5.0/+10.0	≤0.50	3.6-6.3	≥60	±5
EMC300	E	-5.0/+10.0	≤0.50	3.2-5.4	≥90	±5
EMC375	E	-5.0/+10.0	≤0.50	2.8-4.8	≥100	±5
EMC450	E	-5.0/+10.0	≤0.50	2.5-4.2	≥120	±5
EMC600	E	-5.0/+10.0	≤0.50	2.3-3.9	≥150	±5
EMC900	E	-5.0/+10.0	≤0.50	2.1-3.6	≥180	±5

  

 Applications:  Automotive parts  FRP Boat hulls  Building & Construction (Bath Tubs) etc  Industrial Parts (Cooling Towers) Package: Each emulsion chopped strand mat is wound onto a paper tube and then wrapped up with plastic film, which can be packed in cardboard box or wrapped up with kraft paper.the rolls are to be horizontally placed.rolls can be loaded into container directly or on pallets 

fiberglass chopped strand mat (CSM)